Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
See the difference
Before
After
Before
After
Before
AfterHow Much Does HVAC Cleaning Cost in Arlington?
HVAC cleaning in Arlington typically costs $300 to $650 for a standard whole-home duct and system cleaning, with most single-family homes landing around $400 to $525. Light-commercial and larger properties run $700 to $1,400 or more depending on square footage and the number of systems. We give a written estimate before any work starts, and the estimate sets the final price.
That range covers more than running a vacuum through the vents. A full-system cleaning means the supply and return ducts, the registers and grilles, the air handler, and the blower compartment. It also means a look at the parts that actually collect dust: the filter housing, the coil, and the plenum joints where gaps let unfiltered air in. Our technicians have up to 11 years of experience reading those signs in Arlington homes, and we run Rotobrush and Nikro systems built for the job rather than a shop-vac with a hose.
Arlington’s housing stock is why pricing here never falls into one neat number. A 1940s bungalow in Ashton Heights with original galvanized ducts and a single return is a different job from a newer townhome off the Orange Line corridor with two air handlers and flex duct throughout. Old ducts hold decades of settled dust; newer flex systems tend to collect dust at the transitions and behind the registers. Either way, the work has to be scoped to the house in front of us.
Key Takeaways
- Whole-home HVAC cleaning in Arlington runs $300 to $650 for most single-family homes.
- Larger homes and light-commercial spaces run $700 to $1,400 or more.
- Clogged dryer vents are priced as a separate fire-safety service, usually $120 to $225.
- Air duct repair, when we find torn or disconnected sections, is quoted separately from cleaning.
- We answer 24/7 and offer free estimates. Call (844) 932-0326.
HVAC Cleaning Cost Breakdown (2026)
Every quote is itemized so you can see what you’re paying for. Here’s what those line items typically run in the Arlington market in 2026.
| Service | Typical Arlington Range | What It Covers |
|---|---|---|
| Whole-home air duct cleaning | $300 – $525 | Supply and return ducts, all registers and grilles, negative-pressure containment |
| Air handler and blower cleaning | $90 – $175 | Blower wheel, blower compartment, filter housing |
| HVAC system cleaning (ducts plus air handler) | $400 – $650 | The full-system package most homeowners choose |
| Additional system (second air handler or zone) | $150 – $300 | Priced per extra system; common in newer townhomes with two units |
| Register and grille cleaning | $15 – $30 each | Removal, wash, and re-seat; high counts add up fast |
| Coil cleaning | $150 – $275 | Evaporator coil face cleaning as part of system maintenance |
| Dryer vent cleaning (fire-safety service) | $120 – $225 | Full lint line clear, exterior termination check, airflow verification |
| Air duct repair (per section) | $85 – $300 | Reconnecting or sealing a torn or separated duct run |
| Light-commercial system cleaning | $700 – $1,400+ | Priced by square footage, system count, and access |
Those ranges are estimates, not a fixed menu. What pushes a job toward the high end: a house with two HVAC systems, ducts that are hard to reach through finished ceilings, or heavy buildup in a home that hasn’t been cleaned in many years. What keeps it lower: one system, easy access panels, and registers that are simple to reach. A written estimate after we’ve seen the system is the honest way to land on a number.
One thing we’ve learned about Arlington specifically: a lot of this housing dates to the 1930s through the 1950s, and older ductwork is where the surprises live. We regularly find original duct runs that have never been cleaned, and other times we find ducts that were retrofitted with flex during an HVAC upgrade. The two need very different handling, and the cleaning price reflects that. This is why we carry both Rotobrush contact-cleaning systems and Nikro HEPA-rated containment: the old galvanized runs and the newer flex systems get the right equipment, not a one-size approach.
What Affects HVAC Cleaning Pricing in Arlington
- Number of HVAC systems. Arlington townhomes and larger single-family homes often run two systems or two zones. Each one is a separate cleaning job with its own ducts, air handler, and registers, so the price scales up accordingly.
- Duct material and age. Original galvanized steel ducts hold dust differently than modern flex. Older systems take longer to access and clean thoroughly, and sometimes reveal repair needs before the cleaning can even begin.
- Access and layout. A Colonial-style house in Lyon Park with ducts running through tight, finished walls and ceilings is slower to work through than a rambler with an open basement. Access drives labor hours, and labor hours drive the quote.
- Level of buildup. A home that’s been cleaned before and kept up with filter changes is a lighter job than one that’s never had the ducts touched. Homes near busy roads or working through long allergy seasons tend to accumulate more.
- Dryer vent as a separate service. If you’re having both the ducts and the dryer vent cleaned, that’s two distinct services. We quote them separately, because dryer vent cleaning is a fire-safety job, not an upsell tacked onto a duct cleaning.
- Repair needs discovered mid-job. If we open a duct run and find a torn flex connector or a disconnected joint, repairing it closes the loop from diagnosis to fix. That work is quoted on its own, so you approve it before we proceed.
There’s also a comfort and climate angle to consider. Arlington summers are humid and sticky, and that means condensation issues inside ductwork can crop up if the system isn’t balanced. Filter and duct condition in this climate isn’t just about dust; it’s about whether the ducts are letting conditioned air escape and pulling in unfiltered air. That’s a factor we check on every visit because it changes what the job actually needs.
How to Save on HVAC Cleaning
The single biggest thing you can do to keep HVAC cleaning costs down is to change your filters on schedule. A dirty filter starves the system, and a starved system pulls dust into places it shouldn’t be. If your system lives in a dusty environment near a busy street, changing filters more often between cleanings pays for itself.
A few more practical ways to protect the budget:
- Do both services together. If the dryer vent is due and the ducts are overdue, scheduling them in one visit means one setup and one trip. It’s not a discount, but it’s less total effort on your home.
- Note the register count. When you call, tell us roughly how many registers you have and how many systems serve the house. It helps us give a closer starting estimate before we arrive.
- Ask about repair vs. cleaning. Sometimes a duct problem looks like dirt and turns out to be a gap or a tear. Getting a documented assessment means you’re not paying to clean a system that needs fixing first.
- Get your free estimate in writing. Call (844) 932-0326 and we’ll walk through what applies to your home. The estimate is free, and the written number is the one that holds.
The idea isn’t to chase the lowest opening price. It’s to make sure the cleaning actually gets done inside a system, with containment to keep what’s inside from landing in your living room. That’s why we lean on Nikro HEPA-rated filtration: cross-contamination during a cleaning defeats the purpose of cleaning.
Where We Work in Arlington
We serve homes and light-commercial spaces throughout Arlington, from the tight, tree-lined blocks of Ashton Heights and Lyon Park to the newer condos near Ballston and Clarendon. Each neighborhood brings its own housing profile: the historic homes around Ashton Heights tend to have original duct layouts worth a careful look, while the newer construction near Ballston often has a second system or a flex run that needs different attention. Our Arlington service area page goes into that in more detail.
Because Arlington sits inside a highly regulated county, a few jobs run into building or permit questions. Most municipalities require a permit before replacing a full duct system or making major changes to an HVAC layout, so if a repair crosses into that territory, ask the Arlington County building department before the work is scheduled. We’re set up to clean, repair, and diagnose; for larger remodeling or system replacement, a licensed contractor handles that side.
HVAC Cleaning vs. Duct Cleaning: What Are You Actually Paying For?
People often use these terms interchangeably, but they’re not the same job. Duct cleaning concentrates on the ductwork itself: the supply runs, the return runs, and the register openings. HVAC cleaning is the broader service, and it usually includes the air handler, blower assembly, filter compartment, and coil in the scope.
That extra scope is where a lot of the price difference hides. Cleaning only the ducts while leaving a fouled blower wheel or a dust-caked coil means the system is still circulating dirt with every cycle. A full-system cleaning addresses the whole air path, which is why it costs more than a duct-only job, and why it’s the version most of our Arlington customers choose.
When we assess a home, we look for signs of what needs attention: visible buildup in the return, a blower wheel that’s out of balance, missing filter gaskets, evidence of a disconnected duct in the attic or crawlspace. From there we recommend the scope that makes sense, not the biggest package available.
Why Full-System Cleaning Is Worth the Investment
A dirty HVAC system isn’t just unpleasant to think about. It’s a filter problem the filter alone can’t fix. Dust, pet hair, pollen, and debris build up on the blower wheel and the coil, and a dirty coil loses efficiency; the system works harder to deliver the same comfort. That’s why we treat the blower and the coil as part of the job, not an add-on.
Arlington homeowners with allergies get the most from this, but so do people with new babies, older HVAC systems, or a home they just moved into and want to know what’s inside the ducts. If you’re in that camp, a full-system cleaning gives you a documented picture of what was found and what was done.
Our tooling is what makes a full-system job practical in a lived-in home. Rotobrush contact-cleaning systems reach into duct runs with controlled agitation, and Nikro HEPA-rated containment keeps the dust in the machine instead of in your hallway. We also work with familiar IAQ brands like Honeywell, Aprilaire, and Abatement Technologies, which matters when a home has a filtration system or an air cleaner in the loop: the cleaning has to account for that equipment, not ignore it.
Dryer Vent Cleaning: A Separate Fire-Safety Service
We keep dryer vent cleaning as its own line item because it’s a different job with a different risk profile. Lint buildup in a dryer vent restricts airflow and creates a fire risk, and it’s one of the leading causes of home dryer fires nationally. A full clear from the dryer connection out to the exterior termination, plus an airflow check, is worth doing on its own schedule.
In Arlington’s older homes, the vent run sometimes goes up through a wall before it exits, which lets lint collect at the elbow bends. That’s a particular reason to have it checked, rather than just assuming a short lint trap is enough. Most of these jobs fall in the $120 to $225 range, and the estimate is free.
Repair vs. Replace: Which Makes Sense?
It depends on what’s actually wrong. Our rule of thumb: if the ducts are in decent structural shape and the problem is dust and buildup, cleaning is the answer. If we find a torn flex connector, a disconnected joint at a trunk line, or crushed ductwork behind a wall, repair is the answer, and cleaning those ducts first wastes money.
If the system is failing beyond repair, that’s outside our scope. We specialize in air duct cleaning, dryer vent cleaning, and air duct repair. For full system replacement, you’ll want a licensed HVAC contractor. What we do is finish the diagnosis and fix the ducts, then get the system clean. That’s the difference between a company that reports problems and one that closes the loop.
FAQs – HVAC Cleaning Cost
How much does HVAC cleaning cost in Arlington?
Most Arlington homes fall between $300 and $650 for a whole-home HVAC and duct cleaning, with single-family homes typically landing around $400 to $525. Larger homes with two systems, or light-commercial spaces, run $700 to $1,400 or more. Call (844) 932-0326 for an exact quote, and the estimate is free.
Is air duct cleaning worth the money?
Yes, in most cases, and the dollar value is easy to see: professionally cleaned ducts and air handlers help the system run more efficiently and reduce dust circulating into the home, which is what you’re paying $300 to $650 for in Arlington. If the ducts are full of built-up debris or the air handler hasn’t been touched in years, the cleaning does meaningful work. Call (844) 932-0326 and we’ll tell you honestly whether your system needs it.
Can you come today?
Often, yes. We dispatch Sunday through Friday, 7am to 7pm, and we can frequently fit a same-day visit for duct cleaning and dryer vent cleaning. Call (844) 932-0326 to check the schedule, and we’ll book the next opening.
How much does it cost to clean ducts and the dryer vent at the same time?
Duct cleaning typically runs $300 to $525 and dryer vent cleaning runs $120 to $225, so a combined visit often lands between $420 and $750 depending on register count and system size. The estimate is free and itemized, so you’ll see each line before you commit. Call (844) 932-0326.
What does the estimate cover, and is it really free?
The estimate is free and sets the final price. It covers the actual scope of your system: number of HVAC units, register count, duct material and condition, and any repair we find. We don’t hand out a number over the phone and then change it on arrival; we look, then quote. Call (844) 932-0326 to schedule a free estimate.
Get a Free Estimate on HVAC Cleaning in Arlington
Every home is different, and every price comes down to what your specific system needs. We give you a free written estimate, lay out the line items, and stand behind the process with professional-grade equipment: Rotobrush contact cleaning and Nikro HEPA-rated containment, from a company that also does duct repair and dryer vent fire-safety work. Our technicians have up to 11 years of experience, and we answer 24/7.
Call (844) 932-0326 to book a free estimate. Fast dispatch from 7am to 7pm, Sunday through Friday. You can also read more about Juniper Air Duct Cleaning and how we approach full-system work, or visit the Arlington service area page to see how we schedule in your neighborhood.
Pricing reflects the Arlington market as of 2026. Juniper Air Duct Cleaning offers free estimates – call (844) 932-0326.
What Our Customers Say
"My wife's allergies had been bad in this house since we moved in. It's been two months since they did the ducts and it's noticeably better. Not a miracle, but real."
- Chris Bennett"Told me straight that our ducts were in decent shape and didn't need doing every year like the mailer companies claim."
- Chris Parker"Quoted per system rather than the bait and switch per vent pricing everybody else in town uses. The number I was told on the phone was the number on the invoice."
- Destiny Bryant